Parts

Aero Precision

Aero Precision EPC-9 Threaded Upper Receiver w/ LRBHO

The EPC-9 upper receiver is the perfect addition to any AR9 build. Including a last round bolt hold open mechanism and compatible with most standard AR15 barrel nut and handguard combinations this upper receiver will help take your pistol caliber build...

Aero Precision

Aero Precision Billet Trigger Guard w/Logo

Upgrade your lower receiver with an Aero Precision Billet Trigger guard. This mil-spec trigger guard provides a custom look to set your rifle apart from the rest. Machined from 6061 billet aluminum Works with standard AR15 and AR10 components

Aero Precision

Aero Precision AR15 MOE Lower Parts Kits

This AR15 Lower Parts Kit includes the components needed to assemble an Aero Precision AR15 Gen 2 Lower Receiver or similar mil-spec lower receiver. It features a Magpul MOE® Grip and Magpul MOE® Trigger Guard. See below for a full list of...

Forward Controls

Forward Controls Trigger Guard (TGF) Winter

TGF (Trigger Guard, Forward Controls) is available in standard (straight) and winter versions. Both are machined from 7075 aluminum, they do not have spring loaded detent for the front, but use a set screw like Magpul's, and a standard trigger guard roll...

Forward Controls

Forward Controls Trigger Guard (TGF) Standard/Straight

TGF (Trigger Guard, Forward Controls) is available in standard (straight) and winter versions. Both are machined from 7075 aluminum, they do not have spring loaded detent for the front, but use a set screw like Magpul's, and a standard trigger guard roll...

Forward Controls

Forward Controls Ejection Port Cover (EPC) Twin Dimple

EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches.  Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features we think many will find useful.   EPC has two "tabs"...

Forward Controls

Forward Controls Ejection Port Cover (EPC) Single Dimple

EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches.  Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features we think many will find useful.   EPC has two "tabs"...

Forward Controls

Forward Controls Castle Nut (CNF)

Call us old fashioned, we like our castle nut staked to prevent it from rotating loose on the receiver extension and causing malfunctions.  Army manual calls for the castle nut to be torqued to 38 to 42ft/lb, and staked in two places.  While...

SB Tactical

SB Tactical SBA3

Designed for all platforms capable of accepting a mil-spec carbine extension, the SBA3 6-position adjustable brace greatly enhances the usability of the firearm by adding a third point of contact. It is constructed of polymer, has integral ambidextrous...

Radian Weapons

Radian Raptor LT Charging Handle AR10/SR25

The Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability.

Geissele

Geissele Super Charging Handle 7.62

The Super Charging Handle (SCH) is machined from a solid block of aircraft grade 7075-T6 aluminum with a hardcoat anodized finish. Its ambidextrous design allows for seamless operation from either side of the weapon.

Radian Weapons

Radian Raptor Charging Handle AR10/SR25

The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and MILSPEC...

Radian Weapons

Radian Raptor SD Charging Handle

The silencer-optimized Raptor-SD features a ported shaft designed to redirect gasses down and forward, away from the shooters face when shooting suppressed. Its ambidextrous design allows rapid palm "blading" or finger-thumb charging of the weapon,...

Radian Weapons

Radian Talon Safety Selector 4 Lever

The Talon ambidextrous safety selector is a modular design that can be installed as a standard 90 degree or as a 45 degree short throw by simply rotating the shaft 180 degree inside the lower receiver. Selector levers install using a precision machined...

Radian Weapons

Radian Raptor Charging Handle

The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and milspec...

Reptilia

Reptilia CQB Pistol Grip

The CQG grip has been specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs. The CQG supports a wide range of hand sizes and weapon configurations, featuring a...

Magpul

Magpul MOE K2 AK Grip

Similar to the MOE SL, the MOE-K2 AK Grip is a drop-in upgrade for AK47/AK74 platforms that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle improves comfort and control on these shorter LOP rifles that...

Magpul

Magpul MOE AK Grip

A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is designed to improve ergonomics and comes with an aggressive TSP texture for positive weapon control. With a one-piece reinforced polymer construction and compatibility with Magpul Grip...

Radian Weapons

Radian Raptor LT Charging Handle

The Radian Raptor-LT uses the same patented ambidextrous functionality as its predecessor. The Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the...

Magpul

Magpul XTM Enhanced Rail Panels

Made in the USA, the XTM Enhanced Rail Panels are low profile, two piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, the Enhanced XTM Panels feature an...

Radian Weapons

Radian Talon Safety Selector 2 Lever

P80

P80 PF940V2 80% FULL SIZE FRAME KIT G17/G22

Polymer80's PF940 80 percent Pistol Frame offers compatibility with Glock 17/22 Gen3 components, and is an industry first. Features such as the extended beaver tail, double undercut trigger guard, and a thumb ledge considerably enhance the ergonomics...

Magpul

Magpul MOE SL-K Stock Milspec

A drop-in replacement buttstock for AR15/M4 mil-spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a short and slim profile, a smaller rubber butt-pad with rolled toe for easy...

Magpul

Magpul MOE SL Stock Mil-Spec

Made in the USA, the MOE SL Stock Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches,...