Mounts

Scalarworks

Scalarworks Standalone LEAP/10 1.93"

SPECS Materials 7075-T6 Aluminum / 4140H Steel Finishes Type III Anodizing / Flash Nitride Center height over rail 1.93" Co-Witness None Weight 43g Origin United States of America COMPATIBILITY Rails MIL-STD-1913 Picatinny Aimpoint...

Unity Tactical

Unity FAST Red Dot Riser FDE 2.26"

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26" optical centerline height provides faster/easier reticle acquisition while wearing electronic EarPro/communications...

Unity Tactical

Unity FAST FDE Magnifier Mount 2.26" G23/G30/G33/G43/G45

FAST is a series of optic mounts and platforms that provide end users with a quicker sight picture than standard height mounts. A 2.26" optical centerline height provides faster/easier reticle acquisition while wearing electronic EarPro/communications...

Sig Sauer

Sig Sauer ALPHA3 One Piece 34mm 1.535 height

SIG's proprietary steel alloy ALPHA3 Scope Mounts are machined with an exactness that is both strong yet ductile that allows the rings to form around a riflescope, yet will not damage scope under proper installation. The steel rings are epoxy powder...

Leupold

Leupold, BackCountry, Rings, 1" Rem 700 Black

Leupold, BackCountry, Rings, 1" Med, 2 Piece, Fits Remington 700, Matte Black  

Reptilia

Reptilia, DOT Mount, Black, 1.93" Optical Axis Height, Holosun 509T, Anodized

The 1.93 DOT Mount for Holosun HE509T by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913...

Reptilia

Reptilia, DOT Mount, 1.93" Optical Axis Height, Fits Aimpoint Micro, Anodized Flat Dark Earth

The 1.93 DOT Mount by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to...

Reptilia

Reptilia, DOT Mount, Lower 1/3 Co-Witness, Fits Aimpoint ARCO, Anodized Black

The DOT Mount(TM) by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and...

American Defense MFG

American Defense Mfg. AD-T1 Mount 1/3 Co-Witness Height

The AD-T1 lightweight mount is designed for the Aimpoint T1/T2 and similar red dots. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational awareness compared to traditional mounts. This mount is...

American Defense MFG

American Defense Mfg. AD-T1 Mount Co-Witness Height

The AD-T1 lightweight mount is designed for the Aimpoint T1/T2 and similar red dots. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational awareness compared to traditional mounts. This mount is...

American Defense MFG

American Defense Mfg. AD-MRO Mount 1/3 Co-Witness Height

The AD-MRO lightweight mount is designed for the Trijicon Miniature Rifle Optic. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational awareness compared to traditional mounts. It is precision...

American Defense MFG

American Defense Mfg. AD-MRO Mount Co-Witness Height

The AD-MRO lightweight mount is designed for the Trijicon Miniature Rifle Optic. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational awareness compared to traditional mounts. It is precision...

American Defense MFG

American Defense Mfg. AD-509T Mount 1/3 Co-Witness Height

The AD-509T QD mount was developed for the Holosun 509T red dot for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-509T QD mount is a one piece unit precision machined from 6061 T6 aluminum and...

American Defense MFG

American Defense AD-509T Mount Co-Witness Height

The AD-509T QD mount was developed for the Holosun 509T red dot for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-509T QD mount is a one piece unit precision machined from 6061 T6 aluminum and...

C&H Precision Weapons

C&H Precision SIG P320 Pro Series to Trijicon RMR/SRO

The C&H Precision plates are designed, manufactured and shipped from their small family owned business in Coastal Georgia. Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality...

C&H Precision Weapons

C&H Precision SIG P320 Pro Series to Holosun 509T (STEEL)

The C&H Precision plates are designed, manufactured and shipped from their small family owned business in Coastal Georgia. Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality...

Forward Controls Design

Forward Controls Design RS, OPF-S (Rear sight for OPF-Staccato)

RS, OPF-S (rear sight, OPF-S) is designed and made for OPF-S, RMR and OPF-S, ACRO adapter plates for Staccato 2011 P, C, C2 and XC.   Precision milled from 1018 steel and black oxide coated.  A 8-32x5/16 set screw is provided to securely anchor...

Forward Controls Design

Forward Controls Design OPF-S, RMR(Staccato)

OPF-S, RMR (Optics Platform, Staccato, RMR) is designed for optics ready Staccato P, C, C2 and XC with the factory or aftermarket 0.285 front sight.  OPF-S, RMR features a dovetail compatible with the steel rear sight we designed and make for OPF-S,...

Forward Controls Design

Forward Controls Design OPF-G43x/48, RMRcc

With the OPF-G43x/48, RMRcc, we didn't merely raise the mounting surface to provide a platform for the RMRcc.  As RMRcc is longer than the G43X/48 MOS cut, the sight overhangs on the slide.  When installed, the bottom of RMRcc (with Trijicon...

Forward Controls Design

Forward Controls Design OPF-P320, RMR

Machined in 4140 steel and Melonite coated, OPF-P320, RMR, is a new member of our OPF (Optics Platform, Forward Controls) line.  We again eschew aluminum for this application, and continue to use steel as other OPF plates, we prefer steel plates for...

Forward Controls Design

Forward Controls Design OPF-M17, ACRO, RSD

Machined in 4140 steel and black oxide coated, OPF-M17, ACRO, RSD  is a new member of our OPF (Optics Platform, Forward Controls) line.  We again eschew aluminum for this application, and continue to use steel as other OPF plates, we prefer...

Forward Controls Design

Forward Controls Design OPF-M17, ACRO

Machined in 4140 steel and black oxide coated, OPF-M17, ACRO  is a new member of our OPF (Optics Platform, Forward Controls) line.  We again eschew aluminum for this application, and continue to use steel as other OPF plates, we prefer steel...

Forward Controls Design

Forward Controls Design OPF-G, DPP

OPF-G, DPP (Optics Platform, Forward Controls, Delta Point Pro) is the latest member of the OPF line.  OPF-G, DPP uses the same proven design of the OPF-G, RMR to keep the Delta Point Pro immobile, the simplest and most effective way to prevent...

Forward Controls Design

Forward Control Designs OPF-G, ACRO

OPF-G, ACRO (Optics Platform, Glock, for RMR) is a Glock MOS Adapter Set 01 compatible plate for mounting Aimpoint's ACRO P1 and P2 on Glock Gen 4 and Gen 5 slides, G17, G19, G20, G45, G47, G34, G35, G41 (width 25mm/1 inch.), and G40.