Mounts

Bravo Company Mfg

BCM A/T Optic Riser 525-5

A/T Optic Riser 525-5 is approximately 2-1/8” long and is intended to be used with a red dot or other single optic or accessory.  This riser has 5 recoil slots (6 lugs).  All of our risers are the same .525 of rise over the top...

Bravo Company Mfg

BCM Trijicon MRO Mount 1.93"

BCM Trijicon MRO Mount 1.93"

Unity Tactical

Unity Tactical FAST FTC 4x Magnifier 2.26" - Black

FAST™ FTC 4X   The FAST™ FTC 4X is the first integrated magnifier available on the market, bringing the magnifier up to a 2.26″ optical centerline from the rail. Integrating the mount with the optic shaves weight, increases...

Reptilia

Reptilia ROF RMR Riser 2.5mm - FDE

Reptilia, Riser, Flat Dark Earth, Fits Trijicon RMR, Anodized 8.6 Grams Machined from billet 7075-T6 aluminum Type III hardcoat anodized Flat Dark Earth Product Description   The Reptilia ROF Riser is an add-on plate for their ROF line...

Arken Optics

Arken Halo Titanium Scope Rings - 30mm, Medium (1.26)

Arken Halo Titanium Scope Rings - 30mm, Medium (1.26)

Arken Optics

Arken Halo Titanium Scope Rings - 30mm, Low (0.97)

Arken Halo Titanium Scope Rings - 30mm, Low (0.97)

Arken Optics

Arken Rigid Precision Cantilever - 30mm, 20 MOA

Rigid Precision Mounts Cantilever - 30mm, 20 MOA   The ARKEN OPTICS Rigid Precision cantilever style mount (20 MOA or 0 MOA) provides near 2.5 Inches of forward extension for better eye relief typically desired for use on AR style platforms. The...

C&H Precision Weapons

C&H Precision, V4, Optic Mounting Plate, For M&P Core 2.0 to Holosun EPS/EPS carry

C&H Precision, V4, Optic Mounting Plate, For Smith & Wesson M2.0 C.O.R.E. to Holosun EPS/EPS Carry, Anodized Finish, Black For Smith & Wesson M2.0 C.O.R.E. to Holosun EPS/EPS Carry Material: Plates are made from 6061 aluminum Finish:...

Reptilia

Reptilia ROF-90 30mm, RMR - FDE

Reptilia, ROF-90, 30mm, For Geissele Super Precision optic mount, Fits Trijicon RMR, Anodized Flat Dark Earth Machined from billet 7075-T6 aluminum MIL-STD, Type III, hardcoat anodized 34 grams Made in USA Product Description   The...

KASTLE Laser Diving Board - FDE

KASTLE Laser Diving Board FDE   Attaches to FRT-226 mounts, allowing for more space to mount your IR laser.

Reptilia

Reptilia ROF-SAR 30mm for RMR - Black

Reptilia, ROF-SAR, Mount, For Trijicon RMR, Fits 30MM Optic, Anodized, Black Type III hardcoat anodized 7075 aluminum 36gr NSN: 1005-01-674-6724 MADE IN USA Product Description   The Reptilia ROF SAR is a drop-in upgrade for magnified...

Staccato

Staccato Full Size Optics Plate Kit Holosun 508T/507C/507Competition

Dawson Precision® Holosun 507C/508T/507Comp Eco Mounting Kit   Product Description     Dawson Precision® Holosun 507C/508T/507Comp Eco Mounting Kit. Fits all Staccato Dawson Precision® Optic equipped pistols,...

Springfield Armory

Springfield Prodigy AOS Mounting Plate - Aimpoint ACRO

Agency Optic System (Aos) Mounting Plates For 1911 DS SPRINGFIELD ARMORY1 706397965099 -   AGENCY OPTIC SYSTEM (AOS) MOUNTING PLATES FOR 1911 DS Springfield Prodigy Optic Plate Kit Acro

Springfield Armory

Springfield Prodigy AOS Mounting Plate - Holosun 509

Springfield Armory Holosun 509T Agency Optic System Mounting Plate PH5077N-509-PLATE-RET Color: Black, Gun Model: Springfield Armory 1911 DS Prodigy   Product Info for Springfield Armory Holosun 509T Agency Optic System Mounting...

Arisaka

Arisaka Inline Scout Mount M-Lok Tan Anodize

Arisaka Defense, Light Mount, For SureFire Scout Light Weapon Lights, Fits MLOK, Anodized Finish, Tan Length: 3.4" Height: 0.20" (at Surefire Scout Light mounting point) Weight: 0.6 oz Hardware: Two M-Lok nuts, two 10-24x5/16" Torx button head...

Reptilia

Reptilia, DOT Mount Lower 1/3 Aimpoint ARCO FDE

Reptilia, DOT Mount, Lower 1/3 Co-Witness, Fits Aimpoint ACRO, Anodized Flat Dark Earth Type III hardcoat anodized 7075 aluminum Nitrided 4140 steel Made in USA Includes mounting screws and hex L-key Product Description   The DOT...

Radian Weapons

Radian Weapons Guardian Optic Guard & Sights Glock MOS RMR

The Radian GUARDIAN Optic Mounting System provides unprecedented protection for your pistol red dot optic. Machined from 7075 aluminum & hard anodized, the design provides top/ front/side impact protection. Optional back-up sights, provide an...

Reptilia

Reptilia, DOT Mount, 1.93" Optical Axis Height, Fits Aimpoint Micro, Anodized Flat Dark Earth

The 1.93 DOT Mount by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to...

Reptilia

Reptilia, DOT Mount, Lower 1/3 Co-Witness, Fits Aimpoint ARCO, Anodized Black

The DOT Mount(TM) by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics. Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and...

American Defense MFG

American Defense Mfg. AD-MRO Mount Co-Witness Height

The AD-MRO lightweight mount is designed for the Trijicon Miniature Rifle Optic. This sleek design offers 20% in weight reduction and a less obstructed view of your target for more situational awareness compared to traditional mounts. It is precision...

American Defense MFG

American Defense Mfg. AD-509T Mount 1/3 Co-Witness Height

The AD-509T QD mount was developed for the Holosun 509T red dot for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-509T QD mount is a one piece unit precision machined from 6061 T6 aluminum and...

American Defense MFG

American Defense AD-509T Mount Co-Witness Height

The AD-509T QD mount was developed for the Holosun 509T red dot for use on AR pistols and other weapon platforms requiring a small, light weight red dot system. The AD-509T QD mount is a one piece unit precision machined from 6061 T6 aluminum and...

Forward Controls Design

Forward Controls Design OPF-S, RMR(Staccato)

OPF-S, RMR (Optics Platform, Staccato, RMR) is designed for optics ready Staccato P, C, C2 and XC with the factory or aftermarket 0.285 front sight.  OPF-S, RMR features a dovetail compatible with the steel rear sight we designed and make for OPF-S,...

Forward Controls Design

Forward Controls Design OPF-G43x/48, RMRcc

With the OPF-G43x/48, RMRcc, we didn't merely raise the mounting surface to provide a platform for the RMRcc.  As RMRcc is longer than the G43X/48 MOS cut, the sight overhangs on the slide.  When installed, the bottom of RMRcc (with Trijicon...