AR Parts

Forward Controls

Forward Controls Ejection Port Cover (EPC) Twin Dimple

EPC (Ejection Port Cover) is based on TDP dimensions, with thoughtful Forward Control touches.  Billet machined from 7075 aluminum, and hard coat Type III anodized, it incorporates features we think many will find useful.   EPC has two "tabs"...

Forward Controls

Forward Controls 6310KM (5/8x24)

6310KM is the Dead Air Keymo mount version of our 6310 flash suppressor, compatible with Dead Air .30cal sound suppressors with Keymo interface.   We are a big fan of the A2 flash suppressor / compensator (compensator is the Army TM...

Anderson Manufacturing

Anderson Manufacturing AM-15 Assembled Upper Receiver

The AM-15 Assembled Upper Receiver comes with the dust cover forward assist & charging handle already installed. This upper is machined from 7075 T6 Aluminum forging. Featuring M4 feed ramps this upper receiver is machined to Military Specifications...

Aero Precision

Aero Precision AR15 5.56 PRO Series Bolt Carrier Group - Black Nitride

The Aero Precision PRO 5.56 Bolt Carrier Group is built from the ground up to meet the demands of the most extreme conditions. Each component and manufacturing process of the PRO 5.56 Bolt Carrier Group was deliberately chosen to increase the reliable...

Strike Industries

Strike Industries Featureless AR Grip

The Strike Industries Simple Featureless grip matches the contour of the Enhanced Pistol Grip, but allows for usage in feature restricted jurisdictions. The SFG requires no permanent modification to the receiver of your host system, and is constructed of...

Aero Precision

Aero Precision .308 / 7.62 Bolt Carrier Group - Black Nitride

This M5 .308/7.62 bolt carrier is a firing mechanism for your big-bore rifle build. It features a mil-spec phosphate finish, is made of steel, chrome lined gas key and firing pin channel, and has forward assist serrations. The bolt features double...

Bravo Company Mfg

BCM Bolt Upgrade/Rebuild Kit

Based on the SOPMOD designed bolt upgrade and rebuild package, this kit is designed to breathe new life into your bolt assembly. The bolt assembly is the heart of your AR15 rifle system and preventative maintenance used by professions insures these...

Bravo Company Mfg

BCM PNT Trigger Assembly AR15

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

Radian Weapons

Radian Raptor LT Charging Handle AR10/SR25

The Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability.

Geissele

Geissele Super Charging Handle 7.62

The Super Charging Handle (SCH) is machined from a solid block of aircraft grade 7075-T6 aluminum with a hardcoat anodized finish. Its ambidextrous design allows for seamless operation from either side of the weapon.

Radian Weapons

Radian Raptor Charging Handle AR10/SR25

The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and MILSPEC...

Radian Weapons

Radian Raptor SD Charging Handle

The silencer-optimized Raptor-SD features a ported shaft designed to redirect gasses down and forward, away from the shooters face when shooting suppressed. Its ambidextrous design allows rapid palm "blading" or finger-thumb charging of the weapon,...

Radian Weapons

Radian Talon Safety Selector 4 Lever

The Talon ambidextrous safety selector is a modular design that can be installed as a standard 90 degree or as a 45 degree short throw by simply rotating the shaft 180 degree inside the lower receiver. Selector levers install using a precision machined...

Radian Weapons

Radian Raptor Charging Handle

The Raptor is truly revolutionary in design & function. From rapid palm blading or finger thumb charges of the weapon, the motion is fluid & fast from either strong or support side. Made in the USA from aircraft grade 7075 aluminum and milspec...

Reptilia

Reptilia CQB Pistol Grip

The CQG grip has been specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs. The CQG supports a wide range of hand sizes and weapon configurations, featuring a...

Radian Weapons

Radian Raptor LT Charging Handle

The Radian Raptor-LT uses the same patented ambidextrous functionality as its predecessor. The Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the...

Radian Weapons

Radian Weapons Ultralight AR15 QD Endplate

The Ultralight QD Endplate for AR-15/M-16 pattern rifles. The endplate is machined from billet 7075-T6 aluminum with mil-spec Type III anodized finish and a press-fit Titanium QD sling swivel cup. This combination of materials and finishes is ideal for...

Radian Weapons

Radian Talon Safety Selector 2 Lever

Magpul

Magpul MOE SL-K Stock Milspec

A drop-in replacement buttstock for AR15/M4 mil-spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a short and slim profile, a smaller rubber butt-pad with rolled toe for easy...

Magpul

Magpul MOE SL Stock Mil-Spec

Made in the USA, the MOE SL Stock Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches,...

Magpul

Magpul MOE K2+ AR Grip

The MOE-K2 Plus Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Similar in concept to the smaller MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4's...

Magpul

Magpul MOE K2 AR Grip

Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations...

Magpul

Magpul MOE K AR Grip

Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on...

Magpul

Magpul MOE Carbine Stock Mil-Spec

The MOE Stock - Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields...